THREADED SEALING CAPS

MATERIAL
HDPE
COLOR
Yellow
NOTE
UNF column also valid for type thread BSP
ALMOST OUT OF STOCK, SOON TO BE REPLACED BY CFG SERIES.
Image
Technical design
SIZES
CODE D H H1 THREAD UNF SW1 SW2 BSP PITCH
7681 CFT8X1 12 13 11 M8 10 11 1
7682 CFT10X1 14,2 13 11 M10 12 13,2 1
7683 CFT12X1 16,5 13 11 M12 14 15,4 1
7684 CFT12X1,5 16,5 15 13 M12 14 15,4 1,5
7685 CFT14X1,5 18,5 15 13 M14 16 17,5 1,5
7686 CFT16X1,5 21 15 13 M16 18 19,7 1,5
7687 CFT18X1,5 23 15 13 M18 20 21,9 1,5
7688 CFT20X1,5 25 15 13 M20 22 24,1 1,5
7689 CFT22X1,5 27,5 15 13 M22 24 26,3 1,5
7690 CFT24X1,5 30 15 13 M24 26 28,5 1,5
7691 CFT25X1,5 31 15 13 M25 27 29,6 1,5
7692 CFT26X1,5 32 15 13 M26 28 30,7 1,5
7693 CFT28X1,5 34 15 13 M28 30 32,9 1,5
7694 CFT30X1,5 36,5 15 13 M30 32 35,1 1,5
7695 CFT30X2 36,5 17 15 M30 32 35,1 2
7696 CFT36X1,5 44,5 16 14 M36 39 42,8 1,5
7697 CFT36X2 44,5 18 16 M36 39 42,8 2
7698 CFT42X2 51 18,5 16 M42 45 49,4 2
7699 CFT45X1,5 54,5 16,5 14 M42 48 52,6 1,5
7700 CFT45X2 54,5 18,5 16 M45 48 52,6 2
7701 CFT52X2 62 18,5 16 M52 55 60,3 2
7702 CFT1/4U 10 13,5 11,5 1/4" 8 8,8 28
7703 CFT3/8U 13 14,5 12,5 3/8" 11 12,1 24
7704 CFT7/16X24U 15,5 14,5 12,5 7/16" 13 14,3 24
7705 CFT7/16X20U 15,5 15 13 7/16" 13 14,3 20
7706 CFT1/2U 17,5 15 13 1/4" 15 16,5 28
7707 CFT9/16U 18,5 15,5 13,5 9/16" 16 17,5 18
7708 CFT5/8U 21 15,5 13,5 5/8" 18 19,7 18
7709 CFT3/4U 24 16,5 14,5 3/4" 21 23 16
7710 CFT13/16U 26,5 16,5 14,5 13/16" 23 25,2 16
7711 CFT7/8X18U 27,5 15,5 13,5 7/8" 24 26,3 18
7712 CFT7/8X14U 27,5 17,5 15,5 7/8" 24 26,3 14
7713 CFT1U 31 17,5 15,5 1" 27 29,6 14
7714 CFT1,1/16U 34,5 18,5 16,5 1.1/16" 30 32,9 12
7715 CFT1,3/16U 36,5 18,5 16,5 1.3/16" 32 35,1 12
7716 CFT1,5/16U 41 18,5 16,5 1.5/16" 36 39,5 12
7717 CFT1,3/8U 43 18,5 16,5 1 3/8" 38 41,7 12
7718 CFT1.7/16U 45,5 18,5 16,5 1 7/16" 40 43,9 12
7719 CFT1.5/8U 51 19 16,5 1.5/8" 45 49,4 12
7720 CFT1,3/4U 54,5 17 14,5 1 3/4" 48 52,6 16
7721 CFT1,7/8U 59 19 16,5 1.7/8" 52 57 12
7722 CFT1/8 14 13 11 12 13,2 1/8" 28
7723 CFT1/4 17,5 15 13 15 16,5 1/4" 19
7724 CFT3/8 22 15 13 19 20,8 3/8" 19
7725 CFT1/2 25 17 15 22 24,1 1/2" 14
7726 CFT5/8 29 17 15 25 27,4 5/8" 14
7727 CFT3/4 32 17 15 28 30,7 3/4" 14
7728 CFT7/8 36 17 15 32 35,1 7/8" 14
7729 CFT1 41 19 17 36 39,5 1" 11
7730 CFT1.1/4 51 19 17 45 49,4 1. 1/4" 11
7731 CFT1.1/2 56 19,5 17 50 54,8 1. 1/2" 11
7732 CFT2 71 19,5 17 63 69,1 2" 11
7733 CFT2,1/4 80 19,5 17 70 76,8 2. 1/4" 11
7734 CFT2.1/2 90 19,5 17 80 87,7 2. 1/2" 11
THREADED SEALING CAPS

Where to buy threaded sealing caps?

Panozzo produces a complete range of plastic threaded capsules.

The threaded protection caps of Panozzo have easy grip, which ensures a firm insertion, protecting the thread or the pipe from dirt, moisture and corrosion.

From the www.panozzosrl.com web page you can request free samples of threaded sealing caps, offers and / or the PDF catalog of thread protection.

In section thread protection of the www.panozzosrl.com site you can find threaded protection caps, widely used in the hydraulic, pneumatic and general mechanical industries.

The Panozzo warehouse has more than five thousand articles of plastic printed in various materials (pvc, hdpe, epdm, silicone, etc.)

Where to find threaded protection caps?

Our threaded protection caps of plastic can be found in section thread protection of our www.panozzosrl.com site.

The threaded protection caps offered by Panozzo are excellent for merchandise sectors such as spare parts for body work, boating, modelling or automotive.

threaded protection caps of Panozzo are used especially in the commercial vehicle industry and for the preparation of industrial bodies, thanks to their ease of installation.

Panozzo proposes threaded protection caps of plastic for signage and road signs, for photovoltaic, for the automotive sector.

It is not always easy to choose the threaded protection cap suitable for your purpose. Panozzo wants to help its customers by sending free samples on request (by post or with your courier). To request them, all you have to do is go to www.panozzosrl.com.

Panozzo has a wide variety of shapes and sizes of threaded protection caps in plastic and often it is not easy to find closure of holes on sheet metal.

To find the threaded protection cap in plastic hole cover of the right size for closure of a hole on sheet metal just measure with the caliber the diameter of hole from to close, go to the Panozzo site in section closure holes and click on the image of the chosen threaded protection cap. The header of the dimensional table columns corresponds to the letters found on the technical drawing. You just have to choose the code of threaded protection cap of plastic.

to close is an important thread to protect it from dirt, dust and humidity. In this case we always look for an economic solution with a threaded protection cap of plastic quick to insert and remove.

The company has a wide range of threaded protection caps threaded of protection thread. Our threaded protection caps in plastic can be used to protect threads metric from M8 to M52, GAS from 1/8 "to 7/8" or threads UNF from 1/4 "to 1.7" / 8.

How to request a sample of thread protection?

To request samples of thread protection click on the image of the threaded protection cap of your interest. You can select one or more threaded protection caps and, once you have chosen, click on the link to check the selections and send the request. Please note that if you are already a customer of Panozzo or have already requested samples, you can log in to the CUSTOMER AREA, thus avoiding having to enter all your personal data.

I threaded protection caps of protection pipes, of protection threads or more simply for closure holes can save time and money by avoiding damage caused by dust, dirt or liquids.

for closure molded cases threaded protection caps finned in plastic standard are used, always available in stock and ready to ship. The range includes threaded protection caps of plastic for tubolar circular, rectangular and square. The dimensions range from 10mm. at over 100mm.

Panozzo's threaded protection caps are made of different materials depending on the use. For example for varnishing a threaded protection cap can be used in silicone or Epd or polyethylene. The measures range is from 0.5 mm. to over 100 mm.

How to apply for athreaded sealing caps?

If you have to apply for a quote click on the threaded sealing caps and then on the code that interests you. Click on the icon to the left of the code: threaded protection cap is inserted into the cart. Click on the display to display the shopping cart, indicate the amount of threaded protection caps required and complete all the data on the Master Card if you are not already a customer, otherwise enter user and password.
If you have to add another threaded protection cap of the category thread protection or else, click the green arrow back to the products.

Want to download the PDF catalog of the thread protection family?

You can download the updated PDF catalog of plastic threaded protection caps of your interest from the main page of thread protection or the CATALOG CATALOG PDF section of our site www.panozzosrl.com.

The catalog shows the image, design and material of production and the size of the plastic threaded protection cap that you find on the site www.panozzosrl.com.

Back to top