SEALING THREADED PLUG

MATERIAL
NYLON 6.6
COLOR
YELLOW
NOTE
GAS column also valid for type thread UNF and BSP
Image
Technical design
SIZES
CODE D H H1 THREAD GAS UNF SW1 SW2 PITCH
8347 TFT8X1 12,5 15,5 8 M8 - - 7 4 1
8348 TFT10X1 14,5 16,5 9 M10 - - 9 6 1
8349 TFT12X1 17 16,5 9 M12 - - 10 7 1
8350 TFT12X1.5 17 16,5 9 M12 - - 10 7 1,5
8351 TFT14X1.5 19 17,5 10 M14 - - 13 10 1,5
8352 TFT16X1.5 22 17,5 10 M16 - - 15 12 1,5
8353 TFT18X1.5 24 17,5 10 M18 - - 17 14 1,5
8354 TFT20X1.5 26 17,5 10 M20 - - 19 16 1,5
8355 TFT22X1.5 28 17,5 10 M22 - - 21 18 1,5
8356 TFT24X1.5 30 17,5 10 M24 - - 24 21 1,5
8357 TFT26X1.5 32 20,5 12 M26 - - 24 21 1,5
8358 TFT27X1.5 33 20,5 12 M27 - - 24 21 1,5
8359 TFT28X1.5 34 20,5 12 M28 - - 24 21 1,5
8360 TFT30X1.5 38 20,5 12 M30 - - 24 21 1,5
8361 TFT32X1.5 40 20,5 12 M32 - - 24 21 1,5
8362 TFT36X1.5 45 20,5 12 M36 - - 24 21 1,5
8363 TFT38X1.5 48 20,5 12 M38 - - 24 21 1,5
8364 TFT45X1.5 52 21,5 12 M45 - - 30 27 1,5
8365 TFT52X1.5 60 22 12 M52 - - 30 27 1,5
8366 TFT27X2 33 22 13,5 M27 - - 24 21 2
8367 TFT30X2 38 22 13,5 M30 - - 24 21 2
8368 TFT33X2 40 22 13,5 M33 - - 24 21 2
8369 TFT36X2 45 22 13,5 M36 - - 24 21 2
8370 TFT42X2 50 22 13,5 M42 - - 30 27 2
8372 TFT48X2 55 23 13,5 M48 - - 30 27 2
8373 TFT52X2 60 23 13,5 M52 - - 30 27 2
8374 TFT1/8 16 15,5 8 1/8" - 12 9 28
8375 TFT1/4 19 17,5 10 1/4" - 13 10 19
8376 TFT3/8 22 17,5 10 3/8" - 15 12 19
8377 TFT1/2 27 19,5 12 1/2" - 19 16 14
8378 TFT5/8 29,5 19,5 12 5/8" - 22 19 14
8379 TFT3/4 32 19,5 12 3/4" - 24 21 14
8380 TFT7/8 37 19,5 12 7/8" - 27 24 14
8381 TFT1 40 22,5 15 1" - 30 27 11
8382 TFT1.1/4 50 22,5 15 1.1/4" - 36 33 11
8383 TFT1.1/2 56 24 15 1.1/2" - 41 37 11
8384 TFT1.3/4 62 24 15 1.3/4" - 50 46 11
8385 TFT2 68 24 15 2" - 55 51 11
8386 TFT3/8X24 16 17,5 10 - 3/8" 9 6 24
8387 TFT7/46X20 17 17,5 10 - 7/16" 10 7 20
8388 TFT3/8X24 19 17,5 10 - 3/8" 13 10 24
8389 TFT9/16X18 20,5 17,5 10 - 9/16" 13 10 18
8390 TFT5/8X18 22 17,5 10 - 5/8" 15 12 18
8391 TFT3/4X16 26 17,5 10 - 3/4" 19 16 16
8392 TFT7/8X14 28,5 19,5 12 - 7/8" 21 18 14
8393 TFT1X14 31,5 19,5 12 - 1" 24 21 14
8394 TFT1.1/16X12 33 19,5 12 - 1.1/16" 24 21 12
8395 TFT1.3/16X12 36,5 22,5 15 - 1.3/16" 30 27 12
8396 TFT1.5/16X12 40 22,5 15 - 1.5/16" 30 27 12
8397 TFT1.5/8X12 47,5 22,5 15 - 1.5/8" 36 33 12
8398 TFT1.7/8X12 54 22,5 15 - 1.7/8" 36 33 12
SEALING THREADED PLUG

Where to buy sealing threaded plug?

If you are looking for Threaded caps or if you are looking for a particular type of Threaded caps model then you are on the right site because Panozzo has an almost infinite series of all types of thread protection to satisfy all users.

On our website www.panozzosrl.com in thread protection section you can find Threaded caps, widely used in hydraulic, pneumatic and general mechanical industry.

The Threaded caps offered by Panozzo are also excellent for merchandise sectors such as spare parts for body work, boating, modelling or automotive.

Where to find Threaded caps?

Our Threaded caps of plastic can be found in section thread protection of our www.panozzosrl.com site.

Panozzo not only offers the organization or advice, but also the full management of the order or purchase of thread protection, according to customer needs.

Thanks to the Panozzo's extensive expertise in consulting, design and production of molded parts in plastic and Threaded caps, our offer of thread protection can embrace various application areas.

On the site www.panozzosrl.com you can find Threaded caps of plastic for signage and road signs, for photovoltaic, for automotive sector. Panozzo has always been the reference partner for the development of advanced solutions for thread protection.

Finding closure of holes on sheet metal is very simple because Panozzo has a wide variety of shapes and sizes of Threaded caps in plastic.

The to close of thread is important to protect it from dirt, dust and humidity. In this case we always look for an economic solution with a Threaded caps of plastic quick to insert and remove.

The type of Threaded caps to be used depends on the purpose, and for this reason Panozzo offers both Threaded caps of plastic with high aesthetic value and Threaded caps in plastic cheap and quick to apply.

Finding the Threaded caps in plastic hole cover of the right size for closure of a hole on sheet metal is very simple. Just measure the diameter of the hole from to close with the caliber, go to Panozzo'S website in closure holes section and click on the image of the chosen Threaded caps. The header of the dimensional table columns corresponds to the letters found on the technical drawing. You just have to choose the code of Threaded caps of plastic.

On www.panozzosrl.com in closure holes section you can find several aesthetic Threaded caps, if you need a Threaded caps hole cover for furniture or for window frames.

It is very important to avoid damage due to pollutants, dirt or moisture during shipping or storage. Panozzo recommends using Threaded caps of protection to avoid these problems and to incur higher maintenance costs. In thread protection you can request a sample of the Threaded caps that you want to test.

How to request thread protection?

To request samples of thread protection click on the image of the Threaded caps of your interest. You can select one or more Threaded caps and, once you have chosen, click on the link to check the selections and send the request. Please note that if you are already a customer of Panozzo or have already requested samples, you can log in to the CUSTOMER AREA, thus avoiding having to enter all your personal data.

Panozzo's Threaded caps are made of different materials depending on the use. For example for varnishing a Threaded caps can be used in silicone or Epd or polyethylene. The measures range is from 0.5 mm. to over 100 mm.

for closure molded cases are used Threaded caps finned in plastic standard color black, always available in stock and ready to ship. The range includes Threaded caps of plastic for tubolar circular, rectangular and square. The dimensions range from 10mm. at over 100mm.

Our Threaded caps of protection pipes, of protection threads or more simply for closure holes can save time and money by avoiding damage caused by dust, dirt or liquids.

How to apply for asealing threaded plug?

If you have to apply for a quote click on the sealing threaded plug and then on the code that interests you. Click on the icon to the left of the code: Threaded caps is inserted into the cart. Click on the display to display the shopping cart, indicate the amount of Threaded caps required and complete all the data on the Master Card if you are not already a customer, otherwise enter user and password.
If you have to add another Threaded caps of the category thread protection or else, click the green arrow back to the products.

Want to download the PDF catalog of the thread protection family?

You can download the updated PDF catalog of plastic Threaded caps of your interest from the main page of thread protection or the CATALOG CATALOG PDF section of our site www.panozzosrl.com.

The catalog shows the image, design and material of production and the size of the plastic Threaded caps that you find on the site www.panozzosrl.com.

Back to top