SLOTTED PAN HEAD SCREWS

MATERIAL
NYLON 6.6
COLOR
NATURAL
NOTE
Plastic screws are fasteners used for assembling plastic components.
Nylon screws can be used with or without nuts and bolts . Plastic screws are lightweight, tough, resistant to corrosion, and have good electrical-insulating properties.
CONFORM TO DIMENSIONAL TOLERANCES: ISO 1580 NF E 25-128 - DIN 85
Image
Technical design
SIZES
CODE D D1 L L1 L2 THREAD FILETTO
1738 VTC85-M2X4 3,8 0,6 4 1,3 0,6 M2 0.4
1739 VTC85-M2X5 4 0,5 5 1,3 0,5 M2 0.4
1740 VTC85-M2X6 3,8 0,6 6 1,3 0,6 M2 0.4
1741 VTC85-M2X8 3,8 0,6 8 1,3 0,6 M2 0.4
1742 VTC85-M2X10 3,8 0,6 10 1,3 0,6 M2 0.4
1743 VTC85-M2X12 3,8 0,6 12 1,3 0,6 M2 0.4
1744 VTC85-M2X16 5 0,5 16 1,3 0,5 M2 0.4
1745 VTC85-M2X20 3,8 0,6 20 1,3 0,6 M2 0.4
1746 VTC85-M2X25 3,8 0,6 25 1,3 0,6 M2 0.4
1747 VTC85-M2,5X4,5 5 0,6 4,5 1,5 0,6 M2,5 0.45
1748 VTC85-M2,5X6 4,5 0,7 6 1,6 0,8 M2,5 0.45
1749 VTC85-M2,5X8 4,5 0,7 8 1,6 0,8 M2,5 0.45
1750 VTC85-M2,5X10 4,5 0,7 10 1,6 0,8 M2,5 0.45
1751 VTC85-M2,5X12 4,5 0,7 12 1,6 0,8 M2,5 0.45
1752 VTC85-M2,5X16 4,5 0,7 16 1,6 0,8 M2,5 0.45
1753 VTC85-M2,5X20 4,5 0,7 20 1,6 0,8 M2,5 0.45
1754 VTC85-M2.5X25 4,5 0,7 25 1,6 0,8 M2,5 0.45
1755 VTC85-M3X4 5,6 0,8 4 1,8 0,7 M3 0.5
1756 VTC85-M3X5 5,6 0,8 5 1,8 0,7 M3 0.5
1757 VTC85-M3X6 5,6 0,8 6 1,8 0,7 M3 0.5
1758 VTC85-M3X8 5,6 0,8 8 1,8 0,7 M3 0.5
1759 VTC85-M3X10 5,6 0,8 10 1,8 0,7 M3 0.5
1760 VTC85-M3X12 5,6 0,8 12 1,8 0,7 M3 0.5
1761 VTC85-M3X16 5,6 0,8 16 1,8 0,7 M3 0.5
1762 VTC85-M3X20 5,6 0,8 20 1,8 0,7 M3 0.5
1763 VTC85-M3X25 5,6 0,8 25 1,8 0,7 M3 0.5
1764 VTC85-M3X30 5,5 0,9 30 2 0,8 M3 0.5
1765 VTC85-M3X35 5,5 0,9 35 2 0,8 M3 0.5
1766 VTC85-M3X40 5,5 0,9 40 2 0,8 M3 0.5
1767 VTC85-M4X6 8 1,2 6 2,4 1 M4 0.7
1768 VTC85-M4X8 8 1,2 8 2,4 1 M4 0.7
1769 VTC85-M4X10 8 1,2 10 2,4 1 M4 0.7
1770 VTC85-M4X12 8 1,2 12 2,4 1 M4 0.7
1771 VTC85-M4X16 8 1,2 16 2,4 1 M4 0.7
1772 VTC85-M4X20 8 1,2 20 2,4 1 M4 0.7
1773 VTC85-M4X25 8 1,2 25 2,4 1 M4 0.7
1774 VTC85-M4X30 8 1,2 30 2,4 1 M4 0.7
1775 VTC85-M4X40 8 1,2 40 2,4 1 M4 0.7
1776 VTC85-M5X6 9,5 1,2 6 3 1,2 M5 0.8
1777 VTC85-M5X8 9,5 1,2 8 3 1,2 M5 0.8
1778 VTC85-M5X10 9,5 1,2 10 3 1,2 M5 0.8
1779 VTC85-M5X12 9,5 1,2 12 3 1,2 M5 0.8
1780 VTC85-M5X16 9,5 1,2 16 3 1,2 M5 0.8
1781 VTC85-M5X20 9,5 1,2 20 3 1,2 M5 0.8
1782 VTC85-M5X25 9,5 1,2 25 3 1,2 M5 0.8
1783 VTC85-M5X30 9,5 1,2 30 3 1,2 M5 0.8
1784 VTC85-M5X40 9,5 1,2 40 3 1,2 M5 0.8
1785 VTC85-M6X5 12 1,6 5 3,6 1,4 M6 1.0
1786 VTC85-M6X6,5 12 1,6 6,5 3,6 1,4 M6 1.0
1787 VTC85-M6X8 12 1,6 8 3,6 1,4 M6 1.0
1788 VTC85-M6X10 12 1,6 10 3,6 1,4 M6 1.0
1789 VTC85-M6X12 12 1,6 12 3,6 1,4 M6 1.0
1790 VTC85-M6X16 12 1,6 16 3,6 1,4 M6 1.0
1791 VTC85-M6X20 12 1,6 20 3,6 1,4 M6 1.0
1792 VTC85-M6X22 12 1,6 22 3,6 1,4 M6 1.0
1793 VTC85-M6X25 12 1,6 25 3,6 1,4 M6 1.0
1794 VTC85-M6X30 12 1,6 30 3,6 1,4 M6 1.0
1795 VTC85-M6X40 12 1,6 40 3,6 1,4 M6 1.0
1796 VTC85-M6X50 12 1,6 50 3,6 1,4 M6 1.0
1797 VTC85-M6X60 12 1,6 60 3,6 1,4 M6 1.0
1798 VTC85-M6X70 12 1,6 70 3,6 1,4 M6 1.0
1799 VTC85-M6X80 12 1,6 80 3,6 1,9 M6 1.0
1800 VTC85-M8X10 16 2 10 4,8 1,9 M8 1.25
1801 VTC85-M8X16 16 2 16 4,8 1,9 M8 1.25
1802 VTC85-M8X20 16 2 20 4,8 1,9 M8 1.25
1803 VTC85-M8X25 16 2 25 4,8 1,9 M8 1.25
1804 VTC85-M8X30 16 2 30 4,8 1,9 M8 1.25
1805 VTC85-M8X35 16 2 35 4,8 1,9 M8 1.25
1806 VTC85-M8X40 16 2 40 4,8 1,9 M8 1.25
1807 VTC85-M8X50 16 2 50 4,8 1,9 M8 1.25
1808 VTC85-M8X60 16 2 60 4,8 1,9 M8 1.25
1809 VTC85-M8X80 16 2 80 4,8 1,9 M8 1.25
1810 VTC85-M10X16 20 2,5 16 6 2,4 M10 1.5
1811 VTC85-M10X20 20 2,5 20 6 2,4 M10 1.5
1812 VTC85-M10X30 20 2,5 30 6 2,4 M10 1.5
1813 VTC85-M10X40 20 2,5 40 6 2,4 M10 1.5
1814 VTC85-M10X50 20 2,5 50 6 2,4 M10 1.5
1815 VTC85-M10X60 20 2,5 60 6 2,4 M10 1.5
1816 VTC85-M10X70 20 2,5 70 6 2,4 M10 1.5
1817 VTC85-M10X80 20 2,5 80 6 2,4 M10 1.5
SLOTTED PAN HEAD SCREWS

Searching for slotted pan head screws?

If you are looking for plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws or if you are looking for miniatures then you are definitely on the right site because Panozzo has an almost endless array of all types of fasteners and fixings to meet the needs of all users.

Panozzo not only manages fasteners of plastic, but can also make in plastic by customer design, for small lots.

From the site www.panozzosrl.com, you can request free samples of slotted pan head screws, offers on plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws and/or PDF catalog of fastening systems which exclude the use of metal.

Our fasteners and fixings are able to provide solutions for various sectors: in the section of the fasteners and fixings you can find the screw in plastic for the mechanical, the miniatures for spare parts for the body work, the fasteners for boating, the screw for modelling or plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws for automotive.

Utilized materials also of plastic such as nylon 6.6 and Teflon which are required fastening systems which exclude the use of metal.

Why utilized fasteners and fixings

Often, for various technical and safety requirements, there is the obligation to eliminate potential electrical conductors and then one must to use alternative materials such as plastic, which guarantees the same mechanical properties of metals but without having their negative characteristics.

It is possible to be connected in an appropriate manner between those elements of plastic, using plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws that are not easily subject to wear, assuming you do not reach high temperatures which are higher than 100 ° C:, in this case that would cause significant deformation preventing them from fulfilling their main task properly. In this case you have to think about using other materials such as Teflon.

modelling is one of the sectors which uses, with a certain regularity, slotted pan head screws of plastic thanks to their valuable technical characteristics, so if you need circles screw in plastic for models, all your needs are met with our selections of fasteners and fixings.

Our not metallic plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws are lighter and absorbs the strong vibrations in the most opportune way without unscrewing, are difficult to break and thanks to their elasticity they are resistant to any kind of shock.

Compared to the metal version, plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws offer undoubted advantages such as: less weight, insulation, non-corrosivity, high attenuation, high resistance to vibration and easier handling

Where to find fasteners of plastic? Simple! In the fasteners and fixings of our site you can find all the fastening systems which exclude the use of metal you're looking for.

Panozzo has a well-stocked warehouse of over 700 square meters.

Our flexible service offers the organization, advising or full management of order and/or purchase of screw in plastic based on customer needs.

For Panozzo quality is everything. The articles for the body, such as plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws , are specifically designed to allow a perfect body repair of any type of car. All fasteners and fixings and screw of plastic that you find in the catalog are available in our warehouse and will be shipped as soon as possible, because for us it is crucial that every customer receives the fasteners in plastic they need to do their work as quickly as possible. Navigate in the category fasteners and fixings to discover all our products we provide.

Where to find fasteners and fixings

If you are looking plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws , screw in nylon 6.6 to drive fasteners of plastic for the body or for the preparation of the vehicles you will definitely find all in the site category fasteners and fixings. When it comes to miniatures in plastic it is expected to be a major commodity for the repair of a car because it's not easy to find. Thanks to our careful attention to product quality, you will have screw of plastic both viable and efficient. Browse the category fasteners and fixings and find the fasteners in plastic for the body that you need most.

For the realization of exhibitors assembled with fasteners and fixings or interlocking, slotted pan head screws are also used.

With the fasteners in plastic of Panozzo, such as plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws that allow rapidity and simplicity of the mounting of exhibitors for points of sale, customizable solutions are possible, in the form, in the shape and sizes, to best enhance the image and the communication of each customer.

The fasteners and fixings are in the car, on the shelves, in furniture, machinery, in the home fixtures, household appliances, computer and therefore almost anywhere you find fasteners in plastic

In many situations it is necessary to intervene by removing the materials that may be electrical conductors or which may be subject to dangerous corrosion processes for the structures that use fasteners and fixings. In these cases it is necessary to replace metal parts with fastening systems which exclude the use of metal which, however, possess the same durability characteristics.

The screw in plastic, for example miniatures of plastic, is used especially in those cases in which the elements are subjected to strong corrosion for long periods, in which even hardened steel is unable to withstand. It also has good elastic properties that can provide adequate resistance to vibrations.

Back to top