PLASTIC LOCKNUTS

MATERIAL
NYLON 6.6
COLOR
GRAY, BLACK
NOTE
Plastic locknuts are being used as a secure fastening nut for joining many kinds of parts. When combined with plastic screws or even steel screws, provides low drag torque and smooth operation throughout the life of the assembly
Image
Technical design
SIZES
CODE H S FILETTO
9695 RO/PG7 5 18.0 - 19.0 PG 7
9696 RO/PG9 5 22 PG 9
9697 RO/PG11 5 24 PG 11
9698 RO/PG13,5 5,5 27 PG 13.5
9699 RO/PG16 5,5 30 PG 16
9700 RO/PG21 6 36 PG 21
9701 RO/PG29 7 46 PG 29
9702 RO/PG36 8 59.0-60.0 PG 36
9703 RO/PG42 8 63.0-65.0 PG 42
9704 RO/PG48 8 69.0-70.0 PG 48
9705 RO/M12 5 19 M12 x 1.5
9706 RO/M16G 5 22 M16 x 1.5
153073 RO/M16N 5 22 M16 x 1.5
9707 RO/M20 5,5 27 M20 x 1.5
9708 RO/M25 6,5 33 M25 x 1.5
9709 RO/M32 8 39.0-42.0 M32 x 1.5
9710 RO/M40 7 50.0-52.0 M40 x 1.5
9711 RO/M50 8 63.0-65.0 M50 x 1.5
9712 RO/M60 8 75 M60 x 1.5
9713 RO/3-8-24 5 24 3/8"
9714 RO/1-2 7 27 1/2"
9715 RO/3-4 7 33 3/4"
9716 RO/1 7 47 1"
PLASTIC LOCKNUTS

Searching for plastic locknuts?

Panozzo has an almost endless array of all types of fasteners and fixings to meet the needs of all users.

A strong point is the website: www.panozzosrl.com, which is structured according to the use of products such plastic locknuts and with the images of the plastic parts well in evidence.

From the site www.panozzosrl.com, you can request free samples of plastic locknuts, offers on plastic washers for screws and/or PDF catalog of fixing elements which exclude the use of metal.

Panozzo not only manages parts of plastic, but can also make in plastic by customer design, for small lots.

Often, for various technical and safety requirements, there is the obligation to eliminate potential electrical conductors and then one must to use alternative materials such as plastic, which guarantees the same mechanical properties of metals but without having their negative characteristics.

The production of plastic locknuts is made almost exclusively in PA 6.6. This material is a polyamide belonging to the family of the most popular thermoplastic nylon 6.6 with nomenclature, great for fixing elements which exclude the use of metal. For particular uses it can be assessed by the production of washer Teflon

Panozzo guarantees technical support to the customer, evaluates and advises the type of washer in a logic of economic ethics, finding the most suitable solution for each customer.

Where to use plastic locknuts

Panozzo provides fasteners and fixings as a solution in various sectors. In the fasteners and fixings section of the site www.panozzosrl.com you can find the fasteners in plastic for mechanics, the washer as spare parts for body work, the parts for the boating, the fasteners for the modeling or plastic washers for screws for automotive.

If you need circles fasteners in plastic for modeling articles, all your needs are met with Panozzo's selections of fasteners and fixings.

In the fasteners and fixings of our site you can find all the fixing elements which exclude the use of metal you're looking for.

Our fasteners and fixings are able to provide solutions for various sectors such as for signage and road signs, for photovoltaic or for the automotive sector.

The fixing elements which exclude the use of metal Panozzo can be used in commercial vehicles and for the installation of industrial vehicles, for which it is essential to ease the installation.

Compared to the metal version, plastic washers for screws offer undoubted advantages such as: less weight, insulation, non-corrosivity, high attenuation, high resistance to vibration and easier handling

Where to find fasteners and fixings

If you are looking plastic washers for screws, fasteners in nylon 6.6 to drive parts of plastic for the body or for the preparation of the vehicles you will definitely find all in the site category fasteners and fixings. When it comes to washer in plastic it is expected to be a major commodity for the repair of a car because it's not easy to find. Thanks to our careful attention to product quality, you will have fasteners of plastic both viable and efficient. Browse the category fasteners and fixings and find the parts in plastic for the body that you need most.

The use of plastic washers for screws is provided for vans, for trucks, for vehicles, for trailers,for buses and for coaches.

For Panozzo quality is everything. The articles for the body, such as plastic washers for screws, are specifically designed to allow a perfect body repair of any type of car. All fasteners and fixings and fasteners of plastic that you find in the catalog are available in our warehouse and will be shipped as soon as possible, because for us it is crucial that every customer receives the parts in plastic they need to do their work as quickly as possible. Navigate in the category fasteners and fixings to discover all our products we provide.

Panozzo can become your only point of reference for the purchase of nautical accessories of plastic regarding fixing elements which exclude the use of metal.

If you are looking for nautical accessories in plastic: buttons, caps, clamps, nuts, plug hole covers and screw covers, plastic locknuts, underscrews, washers, grommets, rivets and many other fundamental items to do a perfect job.

For the realization of exhibitors assembled with fasteners and fixings or interlocking, plastic locknuts are also used.

With the parts in plastic of Panozzo, such as plastic washers for screws that allow rapidity and simplicity of the mounting of exhibitors for points of sale, customizable solutions are possible, in the form, in the shape and sizes, to best enhance the image and the communication of each customer.

The fasteners and fixings are in the car, on the shelves, in furniture, machinery, in the home fixtures, household appliances, computer and therefore almost anywhere you find parts in plastic

Panozzo has a more than 700 square meters of warehouse space.

From Panozzo you can find fasteners and fixings for signs, road signs, plastic locknuts for photovoltaics, fasteners in plastic for the automotive sector. Panozzo has always been the preferred partner for the development of advanced solutions for all types of fixing elements which exclude the use of metal.

It is possible to be connected in an appropriate manner between those elements of plastic, using plastic washers for screws that are not easily subject to wear, assuming you do not reach high temperatures which are higher than 100 ° C:, in this case that would cause significant deformation preventing them from fulfilling their main task properly. In this case you have to think about using other materials such as Teflon.

OFFLINE PAGES
Back to top