WING SCREWS WITH WASHER

MATERIAL
Nylon 6.6
COLOR
Natural
NOTE
Plastic screws are fasteners used for assembling plastic components.
Nylon screws can be used with or without nuts and bolts . Plastic screws are lightweight, tough, resistant to corrosion, and have good electrical-insulating properties.
Image
Technical design
SIZES
CODE D L L1 THREAD FILETTO
7374 VTALR-M4X6 16 6 10 M4 0.7
7375 VTALR-M4X8 16 8 10 M4 0.7
7376 VTALR-M4X10 16 10 10 M4 0.7
7377 VTALR-M4X12 16 12 10 M4 0.7
7378 VTALR-M4X15 16 15 10 M4 0.7
7379 VTALR-M4X20 16 20 10 M4 0.7
7380 VTALR-M4X25 16 25 10 M4 0.7
7381 VTALR-M4X30 16 30 10 M4 0.7
7382 VTALR-M4X40 16 40 10 M4 0.7
7383 VTALR-M5X6 16 6 10 M5 0.8
7384 VTALR-M5X8 16 8 10 M5 0.8
7385 VTALR-M5X10 16 10 10 M5 0.8
7386 VTALR-M5X15 16 15 10 M5 0.8
13422 VTALR-M5X16 16 16 10 M5 0.8
7387 VTALR-M5X20 16 20 10 M5 0.8
7388 VTALR-M5X25 16 25 10 M5 0.8
7389 VTALR-M5X30 16 30 10 M5 0.8
7390 VTALR-M5X40 16 40 10 M5 0.8
7391 VTALR-M6X8 25 8 12 M6 1.0
7392 VTALR-M6X10 25 10 12 M6 1.0
7393 VTALR-M6X12 25 12 12 M6 1.0
7394 VTALR-M6X15 25 15 12 M6 1.0
7395 VTALR-M6X20 25 20 12 M6 1.0
7396 VTALR-M6X25 25 25 12 M6 1.0
7397 VTALR-M6X30 25 30 12 M6 1.0
7398 VTALR-M6X40 25 40 12 M6 1.0
7399 VTALR-M6X50 25 50 12 M6 1.0
7400 VTALR-M6X60 25 60 12 M6 1.0
7401 VTALR-M6X80 25 80 12 M6 1.0
7402 VTALR-M8X8 25 8 12 M8 1.25
7403 VTALR-M8X10 25 10 12 M8 1.25
7404 VTALR-M8X16 25 16 12 M8 1.25
7405 VTALR-M8X20 25 20 12 M8 1.25
7406 VTALR-M8X25 25 25 12 M8 1.25
7407 VTALR-M8X30 25 30 12 M8 1.25
7408 VTALR-M8X35 25 35 12 M8 1.25
7409 VTALR-M8X40 25 40 12 M8 1.25
7410 VTALR-M8X50 25 50 12 M8 1.25
7411 VTALR-M8X60 25 60 12 M8 1.25
7412 VTALR-M8X70 25 70 12 M8 1.25
7413 VTALR-M8X80 25 80 12 M8 1.25
7414 VTALR-M10X16 25 16 12 M10 1.5
7415 VTALR-M10X20 25 20 12 M10 1.5
7416 VTALR-M10X30 25 30 12 M10 1.5
7417 VTALR-M10X40 25 40 12 M10 1.5
7418 VTALR-M10X50 25 50 12 M10 1.5
7419 VTALR-M10X60 25 60 12 M10 1.5
7420 VTALR-M10X70 25 70 12 M10 1.5
7421 VTALR-M10X80 25 80 12 M10 1.5
7422 VTALR-M12X16 25 16 12 M12 1.75
7423 VTALR-M12X20 25 20 12 M12 1.75
7424 VTALR-M12X30 25 30 12 M12 1.75
7425 VTALR-M12X40 25 40 12 M12 1.75
7426 VTALR-M12X50 25 50 12 M12 1.75
7427 VTALR-M12X60 25 60 12 M12 1.75
7428 VTALR-M12X70 25 70 12 M12 1.75
7429 VTALR-M12X80 25 80 12 M12 1.75
WING SCREWS WITH WASHER

Searching for wing screws with washer?

If you are looking for plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws or if you are looking for miniatures then you are definitely on the right site because Panozzo has an almost endless array of all types of fasteners and fixings to meet the needs of all users.

A strong point is our website www.panozzosrl.com, which is structured according to the use of products such wing screws with washer and with the images of the plastic fasteners well in evidence.

Panozzo has than five thousand items of plastic molded of various materials (polyethylene, PVC, nylon 6.6, EPDM, silicone, etc.)

With ethical and logical technical and economic support, evaluation and advice on the type of miniatures which is most suited to the customer.

Our fasteners and fixings are able to provide solutions for various sectors: in the section of the fasteners and fixings you can find the screw in plastic for the mechanical, the miniatures for spare parts for the body work, the fasteners for boating, the screw for modelling or plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws for automotive.

Why utilized fasteners and fixings

Often, for various technical and safety requirements, there is the obligation to eliminate potential electrical conductors and then one must to use alternative materials such as plastic, which guarantees the same mechanical properties of metals but without having their negative characteristics.

It is possible to be connected in an appropriate manner between those elements of plastic, using plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws that are not easily subject to wear, assuming you do not reach high temperatures which are higher than 100 ° C:, in this case that would cause significant deformation preventing them from fulfilling their main task properly. In this case you have to think about using other materials such as Teflon.

Our not metallic plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws are lighter and absorbs the strong vibrations in the most opportune way without unscrewing, are difficult to break and thanks to their elasticity they are resistant to any kind of shock.

Compared to the metal version, plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws offer undoubted advantages such as: less weight, insulation, non-corrosivity, high attenuation, high resistance to vibration and easier handling

Where to find fasteners of plastic? Simple! In the fasteners and fixings of our site you can find all the fastening systems which exclude the use of metal you're looking for.

The fastening systems which exclude the use of metal Panozzo can be used in commercial vehicles and for the installation of industrial vehicles, for which it is essential to ease the installation of fasteners of plastic and screw in plastic.

The use of plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws is provided for vans, for trucks, for vehicles, for trailers,for buses and for coaches.

Where to find fasteners and fixings

If you are looking plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws , screw in nylon 6.6 to drive fasteners of plastic for the body or for the preparation of the vehicles you will definitely find all in the site category fasteners and fixings. When it comes to miniatures in plastic it is expected to be a major commodity for the repair of a car because it's not easy to find. Thanks to our careful attention to product quality, you will have screw of plastic both viable and efficient. Browse the category fasteners and fixings and find the fasteners in plastic for the body that you need most.

For the realization of exhibitors assembled with fasteners and fixings or interlocking, wing screws with washer are also used.

With the fasteners in plastic of Panozzo, such as plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws that allow rapidity and simplicity of the mounting of exhibitors for points of sale, customizable solutions are possible, in the form, in the shape and sizes, to best enhance the image and the communication of each customer.

With extensive expertise in consulting, design and production of molded parts in plastic and clear slotted mushroom head screws (wing screws with washer), our offer of fasteners of plastic may extend over several fields of application in the electrical and electronic industries.

So if you are searching for fastening systems which exclude the use of metal automotive or for the electronics industry or for the electrical industry, do not hesitate to ask for samples of our offers or screw in plastic.

The fasteners and fixings are in the car, on the shelves, in furniture, machinery, in the home fixtures, household appliances, computer and therefore almost anywhere you find fasteners in plastic

In many situations it is necessary to intervene by removing the materials that may be electrical conductors or which may be subject to dangerous corrosion processes for the structures that use fasteners and fixings. In these cases it is necessary to replace metal parts with fastening systems which exclude the use of metal which, however, possess the same durability characteristics.

The screw in plastic, for example miniatures of plastic, is used especially in those cases in which the elements are subjected to strong corrosion for long periods, in which even hardened steel is unable to withstand. It also has good elastic properties that can provide adequate resistance to vibrations.

Back to top