MEDIUM TEMPERATURE HIGH CAPS

MATERIAL
EPDM
COLOR
BLACK
Image
Technical design
SIZES
CODE D H THREAD GAS UNF
388 CE0,5X12,7 0,5 12,7 - -
389 CE1,6X19,1 1,6 19,1 - 1/16"
390 CE1,8X25,4 1,8 25,4 - 1/16"
391 CE2,4X19,1 2,4 19,1 - -
392 CE2,4X25,4 2,4 25,4 - -
393 CE2,5X12,7 2,5 12,7 - -
394 CE2,5X25,4 2,5 25,4 - -
395 CE2,8X19,1 2,8 19,1 M3 - -
396 CE2,8X25,4 2,8 25,4 M3 - -
397 CE3,2X12,7 3,2 12,7 - -
398 CE3,2X25,4 3,2 25,4 - -
399 CE3,5X12,7 3,5 12,7 - -
400 CE3,5X25,4 3,5 25,4 - -
401 CE3,8X19,1 3,8 19,1 M4 - -
402 CE3,8X25,4 3,8 25,4 M4 - -
403 CE4X12,7 4 12,7 M4 - -
404 CE4X25,4 4 25,4 M4 - -
405 CE4X38,1 4 38,1 M4 - -
406 CE4,4X12,7 4,4 12,7 - 3/16"
407 CE4,4X25,4 4,4 25,4 - 3/16"
408 CE4,4X38,1 4,4 38,1 - 3/16"
409 CE4,6X25,4 4,6 25,4 - 3/16"
410 CE4,8X12,7 4,8 12,7 M5 - -
411 CE4,8X25,4 4,8 25,4 M5 - -
412 CE5,5X25,4 5,5 25,4 - -
413 CE5,7X12,7 5,7 12,7 M6 - -
414 CE5,7X25,4 5,7 25,4 M6 - -
415 CE5,7X38,1 5,7 38,1 M6 - -
416 CE5,9X12,7 5,9 12,7 M6 - 1/4"
417 CE5,9X25,4 5,9 25,4 M6 - 1/4"
418 CE5,9X38,1 5,9 38,1 M6 - 1/4"
419 CE6,4X25,4 6,4 25,4 - -
420 CE6,4X38,1 6,4 38,1 - -
421 CE7,1X12,7 7,1 12,7 - 5/16"
422 CE7,1X25,4 7,1 25,4 - 5/16"
423 CE7,5X38,1 7,5 38,1 M8 1/16" 5/16"
424 CE7,9X25,4 7,9 25,4 M8 - -
425 CE7,9X38,1 7,9 38,1 M8 - -
426 CE8,7X25,4 8,7 25,4 - -
427 CE9X38,1 9 38,1 - -
428 CE9,5X12,7 9,5 12,7 M10 1/8" -
429 CE9,5X19,1 9,5 19,1 M10 1/8" -
430 CE9,5X25,4 9,5 25,4 M10 1/8" -
431 CE9,5X38,1 9,5 38,1 M10 1/8" -
432 CE10,3X25,4 10,3 25,4 - -
433 CE11,1X25,4 11,1 25,4 - 7/16"
434 CE11,6X25,4 11,6 25,4 - -
435 CE11,6X38,1 11,6 38,1 M12 - -
436 CE11,9X25,4 11,9 25,4 M12 - 1/2"
437 CE12,2X38,1 12,2 38,1 - 1/2"
438 CE12,7X38,1 12,7 38,1 1/4" 1/2"
439 CE12,7X76,2 12,7 76,2 1/4" 1/2"
440 CE12,7X101,6 12,7 101,6 1/4" 1/2"
441 CE13,6X38,1 13,6 38,1 M14 - -
442 CE13,6X76,2 13,6 76,2 M14 - -
443 CE14,3X16,7 14,3 16,7 M15 - -
444 CE14,3X27,9 14,3 27,9 M15 - -
445 CE14,3X38,1 14,3 38,1 M15 - -
446 CE15,2X38,1 15,2 38,1 - -
447 CE15,9X31,8 15,9 31,8 M17 3/8" 5/8"
448 CE15,9X38,1 15,9 38,1 M17 3/8" 5/8"
449 CE15,9X57,2 15,9 57,2 M17 3/8" 5/8"
450 CE17,5X15,9 17,5 15,9 - -
451 CE17,5X38,1 17,5 38,1 - -
452 CE17,5X44,5 17,5 44,5 - -
453 CE17,5X63,5 17,5 63,5 - -
454 CE18,5X38,1 18,5 38,1 - -
455 CE18,5X109,9 18,5 109,9 - -
456 CE19,1X38,1 19,1 38,1 M20 - 3/4"
457 CE19,1X48,9 19,1 48,9 M20 - 3/4"
458 CE19,1X88,9 19,1 88,9 M20 - 3/4"
459 CE19,1X109,2 19,1 109,2 M20 - 3/4"
460 CE20,6X25,4 20,6 25,4 M22 1/2" 7/8"
461 CE20,6X38,1 20,6 38,1 M22 1/2" 7/8"
462 CE21,5X72,2 21,5 72,2 M22 - 7/8"
463 CE22,2X38,1 22,2 38,1 - -
464 CE23,8X38,1 23,8 38,1 M24 - -
465 CE24,6X38,1 24,6 38,1 - -
466 CE24,6X101,6 24,6 101,6 - -
467 CE25,4X20,8 25,4 20,8 M27 - 1"
468 CE25,4X38,1 25,4 38,1 M27 - 1"
469 CE25,4X50,8 25,4 50,8 M27 - 1"
470 CE27,5X76,2 27,5 76,2 - -
471 CE28,6X38,1 28,6 38,1 M30 - -
472 CE30,1X59 30,1 59 - -
473 CE31,8X38,1 31,8 38,1 M33 1" 1.1/4"
474 CE38,1X25,4 38,1 25,4 M39 - 1.1/2"
475 CE38,1X38,1 38,1 38,1 M39 - 1.1/2"
476 CE38,1X44,5 38,1 44,5 M39 - 1.1/2"
477 CE41,3X50,8 41,3 50,8 1.1/4" -
478 CE44,5X38,1 44,5 38,1 - 1.3/4"
479 CE44,5X50,8 44,5 50,8 - 1.3/4"
480 CE47,6X50,8 47,6 50,8 1.1/2" -
481 CE50,8X50,8 50,8 50,8 - -
482 CE53,8X50,8 53,8 50,8 - -
MEDIUM TEMPERATURE HIGH CAPS

Where to buy medium temperature high caps?

Panozzo is the right place if you are looking for caps or if you are looking for a particular model of cap because it has a series of infinite characters of every type of high temperature protection to satisfy every need.

For the protection of threads in painting at high and medium temperatures Panozzo recommends the use of medium temperature high caps in silicone or medium temperature high caps in rubber. The caps of Panozzo are made of different materials depending on the use and the measures range from 0.5 mm to over 100 mm.

Panozzo has more than five thousand articles of plastic printed in various materials (pvc, epdm, epdm, silicone, etc.) in its warehouse is over 700 square meters.

The www.panozzosrl.com site allows the customer to find the cap of plastic he needs very quickly and easily.

From the www.panozzosrl.com website it is possible to request free samples of medium temperature high caps, offers and/or download the PDF catalog of high temperature protection.

The caps of Panozzo can be used in the commercial vehicle industry and for the preparation of industrial bodies, for which the ease of installation is essential.

Panozzo offers a flexible service that includes the organization, consultancy or full management (order / purchase) of high temperature protection, according to customer needs.

For Panozzo quality is everything. Navigate in the high temperature protection category to discover all our products.

In addition, the caps are found in cars, on shelves, in furniture, in machinery, in home fixtures, in household appliances, in computers, etc. Virtually everywhere!

It is very important to close any holes on machinery or other products for the protection from dirt, dust and humidity. In this case we always look for an economic solution with a cap of plastic quick to insert and remove.

With caps of closure holes you can to close any type of hole on sheet metal, on furniture, on light points, in the wall and other artifacts.

Very often the closure of holes on sheet metal is required. Finding the solution is very simple because Panozzo has a wide variety of shapes and sizes of caps in plastic.

As for the size of medium temperature high caps for closure of a hole on sheet metal, just measure with the caliber the diameter of hole from to close, go to the Panozzo site in section closure holes and click on the image of the chosen cap. The header of the dimensional table columns corresponds to the letters found on the technical drawing. You just have to choose the code of cap of plastic.

Very often the same cap in plastic can be used for different purposes such as for example for molded cases circular or for poles or of protection for pipes.

The use of caps of protection against pollutants, dirt or humidity during shipment or storage is very important because it allows to avoid damage to the product and therefore maintenance costs. In high temperature protection you can request a sample of the cap that you want to test.

for closure molded cases caps finned in plastic standard are used, always available in stock and ready to be shipped.

The company has a wide range of caps threaded of protection thread.

The range includes caps of plastic for tubolar circular, rectangular and square. Some caps are also equipped with a handle or tongue for an easier installation.

Have you ever thought how much time is lost in the production of a cap in iron to be welded on tubolar? Using caps finned of plastic is the fastest, easiest and most economical solution.

Panozzo proposes caps of plastic to save its customers time and money due to damage caused by dust, dirt or liquids.

How to request samples of high temperature protection?

To request samples of high temperature protection click on the image of the cap of your interest. You can select one or more caps and, once you have chosen, click on the link to check the selections and send the request. Please note that if you are already a customer of Panozzo or have already requested samples, you can log in to the CUSTOMER AREA, thus avoiding having to enter all your personal data.

How to request an offer of medium temperature high caps?

If you have to request an offer click on the image of medium temperature high caps and then on the code that interests. Click on the icon to the left of the code: the cap is inserted in the cart. Click on the display of the cart, indicate the quantity of caps required and fill in all the details of the personal data if you are not already a customer, otherwise enter the user and password. If you need to add another cap of the high temperature protection or other category, click on the green arrow back to the products.

Do you want to download the PDF catalog of the high temperature protection family?

You can download the always updated PDF catalog of caps in plastic of your interest from the main page of high temperature protection or from the PDF CATALOGS section of our www.panozzosrl.com website. The catalog shows the image, the design, the material of production and the dimensions of the cap in plastic that you find on the site.

Back to top