CAPS WITH HANDLE HIGH TEMPERATURE

MATERIAL
PVC
COLOR
YELLOW
NOTE
RESISTANT TO 220°C
Gas column also valid for type of thread BSP
Image
Technical design
SIZES
CODE D H THREAD GAS UNF GAS/BSP
9790 CAPMHT3,6X13 3,6 13 M4 - -
9791 CAPMHT4,8X13 4,8 13 M4 - -
9792 CAPMHT5,3X13 5,3 13 M6 7/32" -
9793 CAPMHT6,1X13 6,1 13 1/4" -
9794 CAPMHT7,5X13 7,5 13 - -
9795 CAPMHT7,5X25 7,5 25 - -
9796 CAPMHT7,7X13 7,7 13 M8 5/16" -
9797 CAPMHT7,7X25 7,7 25 - -
9798 CAPMHT8,7X13 8,7 13 - -
9799 CAPMHT8,7X25 8,7 25 - -
9800 CAPMHT9,3X13 9,3 13 M10 1/8" 3/8" 1/8"
9801 CAPMHT9,3X25 9,3 25 - -
9802 CAPMHT9,7X13 9,7 13 - -
9803 CAPMHT9,7X25 9,7 25 - -
9804 CAPMHT10,8 10,8 13 7/16" -
9805 CAPMHT10,8 10,8 25 - -
9806 CAPMHT11,1X13 11,1 13 - -
9807 CAPMHT11,1X25 11,1 25 - -
9808 CAPMHT11,9X13 11,9 13 M12 1/2" -
9809 CAPMHT11,9X25 11,9 25 - -
9810 CAPMHT12,4X13 12,4 13 1/4" 1/2" 1/4"
9811 CAPMHT13,2X13 13,2 13 M14 17/32" -
9812 CAPMHT13,2X25 13,2 25 - -
9813 CAPMHT14,3X25 14,3 25 M15 9/16" -
9814 CAPMHT15,3X13 15,3 13 M16 - -
9815 CAPMHT15,3X25 15,3 25 - -
9816 CAPMHT15,9X25 15,9 25 3/8' 5/8" 3/8"
9817 CAPMHT16,3X13 16,3 13 M18 11/16" -
9818 CAPMHT16,3X25 16,3 25 - -
9819 CAPMHT17,4X13 17,4 13 M18 - -
9820 CAPMHT17,4X25 17,4 25 M18 - -
9821 CAPMHT18,8X13 18,8 13 M20 3/4" -
9822 CAPMHT18,8X25 18,8 25 - -
9823 CAPMHT20X13 20 13 - -
9824 CAPMHT20X25 20 25 - -
9825 CAPMHT20,6X13 20,6 13 M22 1/2" 13/16" 1/2"
9826 CAPMHT20,6X25 20,6 25 - -
9827 CAPMHT22X25 22 25 7/8" 5/8"
9828 CAPMHT23,8X25 23,8 25 - -
9829 CAPMHT24,6X13 24,6 13 M25 - -
9830 CAPMHT24,6X25 24,6 25 M25 - -
9831 CAPMHT25,1X25 25,1 25 M26 1" -
9832 CAPMHT26,9X25 26,9 25 - -
9833 CAPMHT28,6X25 28,6 25 M30 7/8" 1.1/8" 7/8"
9834 CAPMHT28,6X38 28,6 38 M30 7/8" 1.1/8" 7/8"
9835 CAPMHT31,2X38 31,2 38 M32 1.1/4" 1"
9836 CAPMHT34,9X25 34,9 25 M35 1.3/8" -
9837 CAPMHT34,9X38 34,9 38 M35 1.3/8" -
9838 CAPMHT38,1X38 38,1 38 M39 1.1/2" -
9839 CAPMHT38,1X50 38,1 50 M39 1.1/2" -
9840 CAPMHT40,8X38 40,8 38 1.5/8" -
9841 CAPMHT41,3X38 41,3 38 M42 1.1/4" - 1.1/4"
9842 CAPMHT41,3X50 41,3 50 M42 1.1/4" - 1.1/4"
9843 CAPMHT44,5X38,8 44,5 38,8 M45 1.3/8" - 1.3/8"
9844 CAPMHT44,5X50 44,5 50 M45 1.3/8" - 1.3/8"
9845 CAPMHT50,8X50 50,8 50 2" - 2"
CAPS WITH HANDLE HIGH TEMPERATURE

Where to buy caps with handle high temperature?

Panozzo is the right place if you are looking for caps or if you are looking for a particular model of cap because it has a series of infinite characters of every type of high temperature protection to satisfy every need.

If you can not find the right product or if you have specific needs, Panozzo is able to create articles in plastic based on customer drawings, for small lots.

Thanks to a well-stocked warehouse and continuous technological innovation for order management, Panozzo manages to quickly manage supplies of caps in plastic.

The www.panozzosrl.com site allows the customer to find the cap of plastic he needs very quickly and easily.

From the www.panozzosrl.com website it is possible to request free samples of caps with handle high temperature, offers and/or download the PDF catalog of high temperature protection.

Where to find caps of plastic? Simple! In the high temperature protection section of our www.panozzosrl.com website you can find what you are looking for.

The caps of Panozzo can be used in the commercial vehicle industry and for the preparation of industrial bodies, for which the ease of installation is essential.

Panozzo offers a flexible service that includes the organization, consultancy or full management (order / purchase) of high temperature protection, according to customer needs.

Thanks to our extensive expertise in consultancy, design and production of molded parts in plastic and caps with handle high temperature, our offer of high temperature protection can embrace different application fields of the industry.

In the high temperature protection site section you can find caps for various product sectors such as mechanics, spare parts for body work, boating, modelling or automotive.

From Panozzo you can find caps of plastic for signage and road signs, for photovoltaic, for the automotive sector. Panozzo has always been the reference partner for the development of advanced solutions for high temperature protection.

In addition, the caps are found in cars, on shelves, in furniture, in machinery, in home fixtures, in household appliances, in computers, etc. Virtually everywhere!

With caps of closure holes you can to close any type of hole on sheet metal, on furniture, on light points, in the wall and other artifacts.

As for the size of caps with handle high temperature for closure of a hole on sheet metal, just measure with the caliber the diameter of hole from to close, go to the Panozzo site in section closure holes and click on the image of the chosen cap. The header of the dimensional table columns corresponds to the letters found on the technical drawing. You just have to choose the code of cap of plastic.

The type of cap to be used depends on the purpose, and for this reason Panozzo offers both caps of plastic with high aesthetic value, cheap and quick to apply.

If you need a cap hole cover for furniture or for window frames on our www.panozzosrl.com site you can find in closure holes section different caps aesthetic that are right for you.

for closure molded cases caps finned in plastic standard are used, always available in stock and ready to be shipped.

The range includes caps of plastic for tubolar circular, rectangular and square. Some caps are also equipped with a handle or tongue for an easier installation.

Have you ever thought how much time is lost in the production of a cap in iron to be welded on tubolar? Using caps finned of plastic is the fastest, easiest and most economical solution.

Panozzo proposes caps of plastic to save its customers time and money due to damage caused by dust, dirt or liquids.

Knowing that it is not always easy to choose the cap suitable for your purpose, we decided to help our customers by sending free samples on request. To request them, all you have to do is go to www.panozzosrl.com. We will send samples by post or your courier to the address you indicate.

How to request samples of high temperature protection?

To request samples of high temperature protection click on the image of the cap of your interest. You can select one or more caps and, once you have chosen, click on the link to check the selections and send the request. Please note that if you are already a customer of Panozzo or have already requested samples, you can log in to the CUSTOMER AREA, thus avoiding having to enter all your personal data.

How to request an offer of caps with handle high temperature?

If you have to request an offer click on the image of caps with handle high temperature and then on the code that interests. Click on the icon to the left of the code: the cap is inserted in the cart. Click on the display of the cart, indicate the quantity of caps required and fill in all the details of the personal data if you are not already a customer, otherwise enter the user and password. If you need to add another cap of the high temperature protection or other category, click on the green arrow back to the products.

Do you want to download the PDF catalog of the high temperature protection family?

You can download the always updated PDF catalog of caps in plastic of your interest from the main page of high temperature protection or from the PDF CATALOGS section of our www.panozzosrl.com website. The catalog shows the image, the design, the material of production and the dimensions of the cap in plastic that you find on the site.

Back to top